Diamond Core Drill Motors DM9, DM10, DM12
DM9, DM10, DM12
INTRODUCTION
This machine is for the intended purpose of diamond core drilling of concrete, masonry, stone and similar materials. It must always be mounted on a drilling stand. This machine is for professional use only and only trained personnel may operate this machine.
All other uses which are not for the intended purpose are prohibited. 
It is equipped with a water feed system which is required for the diamond core drilling process. A PRCD interrupter (portable residual current device) which must be used at all times.
It is equipped with a three or a four speed mechanical gearbox for different core drill size ranges and features a mechanical safety clutch.
The motor has electronics for soft start, overload protection and thermal (overheating) protection. There is a overload warning to alert the operator of load and overload conditions.
The machine is equipped with spirit levels which aid in aligning the tool. Use the Tubular Level for horizontal aligning. Use the Bull's Eye Level for vertical aligning.
High efficiency 3 speed, 3500 W rig-mounted drilling motors with aluminum body. Three models with optimized gearing for different drilling requirements. Choose the version which best suits your drilling needs.

• Sturdy 3 speed and 4 speed Gear Box with oil bath lubrication and mechanical clutch.
• Advanced Electronic Control with soft-start, thermal protection, and overload protection.
• Surge Function lets the operator easily know that the motor is near overload conditions by pulsing the motor without actually tripping out.
• Slow-Start function, a unique automatic hole starting function that reduces motor speed for a short time to allow the kerf to be started.
• LED indicator for optimizing drilling efficiency with overload and overheat warning.
• Aluminum housing for better cooling and durability.
• Anti-seize ring to keep core bits from getting stuck on the spindle.
• Quick-replaceable water seals.

Power:3500 W /16 A (220 V) ｜ 2800 W / 25 A (110 V)
Max. Capacity:250 mm ｜ 300 mm ｜ 350 mm
Type:Wet drilling

Issue Time:		2024-04-25
Expire Time:		2024-06-17