RT series Reverse Osmosis System

Product Overview
The RT series reverse osmosis system are designed for treating low to moderate TDS feedwaters encountered in municipal supplies, dam and river waters, bore and brackish water sources. These basic systems are designed to be simple to install, operate and require little maintenance. A membrane flush facility is standard and operates each time the system is started to assist with keeping the membranes clean. Continual monitoring of feedwater pressure, RO permeate quality and storage tank level is performed by the integrated microprocessor based controller. ROTEK's Reverse Osmosis systems are capable of removing salts as well as other impurities such as bacteria, sugars, proteins, dyes and constituents having a molecular weight greater than 150-250 dalton.

Product Features
** High pressure stainless steel membrane housing
* Low Energy TFC spiral membrane
* High Pressure Schedule 80 pipe work
* Anti-corrosion multistage pump
* Microprocessor controller with TDS readout
* Automatic flush with raw water
* Low feedwater pressure sensor
* Storage tank level sensor input
* Permeate and reject flow rotameters
* Adjustable pressure regulator valve
* Liquid filled pressure gauges (Filter Feed, RO Feed)
* Concentrate recycling valve
* Electro-polished stainless steel frame
* Powder coated control panel with power supply provisions for pre-filters

Specifications

Specifications \ Models		RT 1500	RT 3000	RT 4500	RT 6000	RT 7500	RT 9000
Permeate Flow	GPD / LPH	1500 / 250	3000 / 500	4500 / 750	6000 / 1000	7500 / 1250	9000 / 1500
Module Qty & Size		(1), 4"x40"	(2), 4"x40"	(3), 4"x40"	(4), 4"x40"	(5), 4"x40"	(6), 4"x40"
Nominal Recovery		50%
Motor (kw)		0.75	2.25	2.25	2.25	3	3
Weight (kg)		43	43	43	43	43	43
Dimension (mm)		530 x 530 x 1150

Feed Water Requirments
pH: 3.0 : 10.0
TDS: < 2,000 ppm (choose BW systems when exceed)
Turbidity: < 1.0 NTU (required pre-treatment when exceed)
SDI: < 5.0 (required pre-treatment when exceed)
Hardness: < 50 ppm (required pre-treatment when exceed)
Residual Chlorine: < 0.1 ppm (required pre-treatment when exceed)

Feed water quality, pressures and flow rates have a significant impact on the performance of any reverse osmosis system. To ensure reliable and consistent long-term performance, it is important to supply feed water having the minimum specifications detailed below. If your feed water supply is marginal, you should consider using a feed water break tank and booster pump to supply the system.

Issue Time:		2024-05-22
Expire Time:		2025-01-14